The EDELRID classic in a new design. No further explanation required. For universal usage such as abseiling and belaying.

A compact, ultra-light belay and abseil device for half ropes and twin ropes.

Our most versatile belay and abseil device made of solid stainless steel for durability.

Innovative belay device with high braking performance for single ropes. The optimized Mega Jul geometry ensures easy and secure belaying even with thicker ropes.

Figure of eight abseil device designed specifically for canyoning with different braking positions.

Assisted-braking resistor for increasing rope friction when there is a large weight difference between the belayer and lead climber. In the event of a fall, the OHM increases the amount of rope friction so that a lighter belayer can hold a heavier lead climber without difficulty.

Belay set containing Jul² belay device and HMS Bulletproof Triple FG carabiner.

Belay set containing Mega Jul belay device and HMS Bulletproof Screw FG carabiner.

The most versatile ever belay device. The GIGA JUL is a standard and assisted braking tuber in one. The assisted braking function which supports the braking force can be activated or disabled by an intelligent mechanism. For situation-dependent belaying and abseiling, especially in alpine terrain.

Ultra-light figure 8 descender for use on low-diameter ropes. The special geometry enables several different friction modes, making it possible to precisely adjust the abseiling speed.

Belay set containing Giga Jul belay device and HMS Strike Screw carabiner.

Belay kit specially designed for sport climbing. Comprises a JUL2 belay device and an HMS BULLETPROOF BELAY ECO carabiner.

Easy-to-operate semi-automatic belay device with assisted braking and maximum safety for sport and indoor climbing.

Nordwand Alpine Belay. An innovative and robust belay device. With V-shaped grooves and rear rope-bearing surfaces made of abrasion-resistant steel to prevent wear. The steel insert also prevents the belay device from overheating. The housing is made from lightweight aluminum, so that the total weight of the device amounts to just 80 grams. Suitable for double, half and single ropes ranging from 7.5 to 10.5 mm.

Intuitive belay device with reliable blocking of the climbing rope. The first generation of the Smart belay device was successfully launched in 2009. Built on the experience the new Smart 2.0 offers significantly improved braking effectiveness as well as optimized geometry and intuitive handling. The newly developed brake insert blocks the rope in the event of a fall. The belaying action of the Smart 2.0 is the same as the previous model and is therefore tailored to the belayer's reflex movements.

Perfect combination for maximum safety: the Smart 2.0 reliably locks the rope in the event of a fall, while at the same time the Safety Gate prevents the Smart HMS from twisting in the belay loop of the climbing harness. An essential gadget for safe climbing.

The must-have package for beginners as well as advanced climbers seeking a higher level of safety. The Smarter ensures additional safety for the Smart 2.0 belay device and locks to prevent falls even in the event of incorrect use (for example, if the braking hand is held in the wrong position above the belay device). The safety gate prevents the Smart HMS carabiner from twisting in the belay loop of the climbing harness.

Very lightweight belay device based on the tube principle; suitable for double, half and single ropes from 7.5 to 10.5 mm in diameter. The V-shaped grooves permit controlled retention of drops even at low manual force as well as controlled lowering of the climber.

A belay device for use in alpine terrain, based on the tube principle. As well as securing a lead climber, the very light Wall Alpine Belay also allows one or two second climbers to be independently belayed in an autolocking mode from the fixed point. The optimized geometry also allows comfortable belaying as well as reliable blocking in the event of a fall by the second climber, the blocking action can be released again using a sling and the large eyelet on the device. The V-shaped grooves allow the controlled holding of lead falls, even at low levels of manual force. Suitable for twin, half and single ropes from 7.5 to 10.5 mm in diameter.